Configuration Using Kpg-99D - Kenwood TK-7160 Modification Information

2 CONNECTING OPTIONAL DEVICES
(2) Remove the top rubber packing.
(3) Remove 8 screws and then lift the shielding
plate.
36
CONTENTS
2. Connect the cable with connectors (E37-1164-x5)
that is used for installing the ANI Board to the CN2/
CN3 connectors of the TX-RX PCB.
3. Reassemble the shielding plate, and re-install the
packing using screws.

2.10.3 Configuration using KPG-99D

ANI Board information can be written to the transceiver
by using KPG-99D after installing the ANI Board.
Follow the procedure below to write ANI Board
information to the transceiver.
1. Run KPG-99D.
2. Select the Program pulldown menu > "Read Data
from the Transceiver". The "
can be clicked to read data from the transceiver.
The Read Data from the Transceiver dialog box
appears on the display.
Figure 2-25 Read Data from the Transceiver Dialog Box 1
3. Click the "Read" button.
KPG-99D starts reading configuration data from the
transceiver.
Figure 2-26 Read Data from the Transceiver Dialog Box 2
Confidential
QE-2
E37-1164-x5
" icon in the toolbar
MOD (K)/Ver. 2.00