Lp-4X0 "000.000"-"110.000" Lp-4X5/Lp-V15 - Panasonic LP-400 Series External Control Manual

⿎ Step & repeat condition : SRC
Sets the condition of "Step & Repeat" to mark the same marking contents on multiple locations in one file.
• Setting / Readout data of general condition
Set the step & repeat condition for specified number with the following format:
Sub
STX SRC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of general condition
STX SRC R
Data length
Name
[byte]
Step & repeat
Number of row
Number of
column
Row step
Column step
X offset (8)
Y offset (8)
Counter update
at each step
* For the detail of the model type, refer to "Target laser marker" (P.8).
Reference
• When the Step and Repeat setting is set to "None", the Step and Repeat setting can be omitted. If data is input and that
data is out of the setting range, response data for abnormal receiving is returned.
• When the data is readout under the step & repeat is set to "None", the subsequent fields following to "number of Row" is
not readout.
126
[Step & repeat] [Number of row] [Number of column]
[Row step] [Column step] [X offset] [Y offset]
[Counter update at each step]
(Check sum) Delimiter
Description
"0": OFF
1
"1": ON
3
"001"–"100"
(number of row x column < 1000)
3
Model type*
7
LP-V10
LP-4x0
LP-4x5/LP-V15
7
LP-4x1/LP-W
Model type*
LP-V10
LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
"00": same in all steps
"xy": counter is activated in each steps
"x" represents how to count if there are
"Mark OFF" part in step & repeat.
"x=1": skips the counter
(missing number)
2 "x=2": not skip the counter
(sequential number)
"y" represents direction for counting order.
"y=0": from upper left to right
"y=1": from upper left to bottom
"y=2": from upper right to left
"y=3": from upper right to bottom
Max. 39-byte
Setting range [mm]
"000.000"–"090.000"
"000.000"–"110.000"
"000.000"–"160.000"
"000.000"–"055.000"
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
ME-LP400V-EX-6
(Check
Delimiter
sum)
Remarks
Marking the same data is repeated to
the X or Y axis direction.
The number of repeated marking to Y
direction.
The number of repeated marking to X
direction.
The marking pitch to the Y direction is
specified.
The marking pitch to the X direction is
specified.
Specifies X/Y Offset of the reference
step.
(If both values of X&Y offsets are "0",
X/Y off setting can be omitted.)