Panasonic LP-400 Series External Control Manual page 104

8. When EAN/UPC and EAN128 (GS1-128) are 1D part of composite code
Data length : 54-byte (LP-V series), 51-byte (LP-400/LP-W series)
Data length
Name
[byte]
Bar code No. 1
Area No. 1
Code type 2
System
1
reservation
Inversion 1
Bar code
7
height
Narrow
5
element
X position 8
Y position 8
Tilt angle 7
Quiet/narrow
4
element W
Laser power
3
correction
Scan speed
3
correction
(Laser
pulse cycle
correction) (3)
(Only for LP-V
series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
104
Description
"0"–"7"
"0"–"9", "A"–"F"
CC-A Composite 1D part
"46": EAN/UPC
"47": UCC/EAN128
"48": EAN/UPC with human readable text
"49": UCC/EAN128 with human readable text
CC-B Composite 1D part
"56": EAN/UPC
"57": UCC/EAN128
"58": EAN/UPC with human readable text
"59": UCC/EAN128 with human readable text
CC-C Composite 1D part
"67": UCC/EAN128
"69": UCC/EAN128 with human readable text
"0" fixed
"0": Do not invert
"1": Invert
Model type* Setting range [mm]
LP-V10 "001.000"–"090.000"
LP-4x0 "001.000"–"110.000"
LP-4x5/LP-V15 "001.000"–"160.000"
LP-4x1/LP-W "001.000"–"055.000"
"0.050"–"1.000" [mm]
Model type* Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
"-180.00"–"+180.00" [°]
"00.0"–"20.0"
"000"–"200" [%]
"005"–"500" [%]
"050"–"200" [%]
ME-LP400V-EX-6
Remarks
Specifies which area part is the marking
position of the concatenated marking on
the flying object.
In case of marking static object, specify
"0".
Set the larger value than "Line width" in
laser setting screen.
Specifies the center coordinate of the
code.
Ratio of quiet width to narrow element
width.
• The correction ratio is calculated using
the value set at the laser setting as
100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.