Table of Contents
Advertisement
These texts can be edited in either the alarm point dialog box or the Text Editor. Both text
will be synchronised.
Explanations:
Zone-Address column
Shows the already programmed alarm points (e.g. 001-01, 001-02, 002-01 etc.). Only the
texts have to be typed / edited in the "Text" column.
Shows the already programmed zones, i.e. I/O unit 3361 zone line inputs programmed with
address "00" (i.e. ZZZ – 00) and 8 zones expansion board 4580 zone line inputs. Only the
texts have to be typed / edited in the "Text" column.
Text column
Shows already programmed alarm texts. Texts can be typed / edited here.
Note: If any alarm point is required to have a different alarm text in one or more of the
"display units" 1736 or 1728
the "display unit" (Click
up the Text Editor).
140
Regarding text priority order etc. see the Display Units Technical Description.
140
, the text has to be typed in the EBLWin "Text editor", for
button in the Display Unit dialog box which will bring
124
Technical/Programming Manual
FT1020G3 Rev 2.2.1
Advertisement
Table of Contents
