Commissioning Test
3.3
Power Supply ON
3.4
Starting WebLT
3-2
Remove PWR connector on ODU
Set circuit breaker switch for ODU to ON.
Confirm that DC power supply voltage on PWR connector;
Voltage between Pin-1 (minus) and Pin-2 (plus)
In case of DC power feed: within -48 V +/- 10%
In case of AC power feed: within AC 100 V or AC 200 V +/- 10%
Set circuit breaker to OFF.
Connect PWR connector and set circuit breaker to ON
Connect PC with MAINT connector (RJ-45 jack) on ODU.
Start WebLT
For detailed starting WebLT, please refer to Chapter 5, Section 5.2.
Fujitsu and Fujitsu Customer Use Only
BroadOne GX4000 Manual (R3.0) issue 1.03