Installation
Step-13: Install FG cable to the cable
Skin the cable (10 mm) and FG cable is wrapped & soldered to the shield mesh.
Wrap self-bonding insulating tape to the shield mesh part.
Step-14: Fit the thermal tape
Put the thermal tape covering self-bonding insulating tape.
Step-15: Crump TM4
2-38
Fujitsu and Fujitsu Customer Use Only
Crump by crumping tool
Crumping terminal
2
M4, 2.0 mm
BroadOne GX4000 Manual (R3.0) issue 1.03