GE
Grid Solutions
DESCRIPTION
SYSTEM REQUIREMENTS
DESCRIPTION
INSTALLING FROM
ENERVISTA CD
INSTALLING FROM THE
GE MULTILIN WEBSITE
D485 MODBUS TO DEVICENET CONVERTER – USER GUIDE
D485 Modbus to DeviceNet
Converter
Chapter 4: Software overview
Software overview
Introduction
EnerVista P485/D485 Setup is a PC-based configuration software used to describe the
protocol and communication properties for a serial network. When the configuration is
finished and the functionality is tested, it is possible to send memory allocation
information to a printer using EnerVista P485/D485 Setup.
EnerVista P485/D485 Setup can also be used for troubleshooting and diagnostic of the
D485 and the serial network during runtime.
The following hardware and software is required to use the EnerVista P485/D485 Setup
software.
•
Pentium 133 MHz or higher
•
10 MB of free space on the hard drive
•
8 MB RAM
•
Windows 95/98/NT/2000/XP
•
Internet Explorer 4.01 SP1 or higher
Installation procedure
There are two different ways of installing EnerVista P485/D485 Setup; either via the GE
EnerVista CD or from the GE Multilin website at http://www.GEmultilin.com.
Run 'setup.exe' and follow the on screen instructions
Download the self-extracting EXE file from the GE Multilin website at
www.GEmultilin.com.
http://
4–1