Panasonic 5000 Series Operating Instructions Manual page 139

Server Transfer
5. Enter the number of the server to whom you are transferring the check.
6. Press SVR.
Note: If "Call Manager" or a similar message displays, you must turn the keylock to MGR
Mode before you enter the new server number.
[ new server # ]
7. The new server name displays on your screen. This server is now responsible for
the guest check. Service the check to store the new information.
8. Press SERVICE.
SVC
Note: You can repeat this process for as many open checks as needed. To transfer a block
of checks, see the procedure on the next page.
Transferring a Range of Checks
To transfer a block of open checks to a new server, you can use the MGR Mode Server
Transfer procedure. This procedure is listed under the X1 Mode menu. You can use it
whenever you need to transfer several open checks from one server to another.
1. Turn the keylock to the MGR Mode. The MGR Mode menu displays.
2. Use the following sequence to select the Server Transfer option.
1
The Server Transfer screen displays. An example of this screen is shown next.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
SVR
CASH 6
MANAGER OPERATIONS
CASH
4-23