Programming References
•
4.9.2
DIL Table & Port Setting [9-2]
Direct In Line (DIL) can be selected for each CO line as the method of distributing incoming
CO line calls to certain destinations. For each CO line to which the DIL distribution is set,
different destinations can be programmed depending on the time mode (day/lunch/break/
night). If desired, Calling Line Identification (CLI) distribution can be used in conjunction with
the DIL distribution.
DIL
For each CO line to which the DIL distribution is set, different DIL destinations can be
programmed depending on the time mode (day/lunch/break/night). Generally, DIL distribution
is used for CO line calls from analog CO lines. Tenant number and VPS trunk (CO line) group
number can also be programmed for each CO line.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Value Range
Feature Guide References
•
Port
Indicates the port number (reference only).
Default
Value Range
Feature Guide References
•
Card Type
Indicates the CO line card type (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
None
Current slot number
Slot number
None
Current port number
Port number
None
Current card type
Card type
1.1.1.1 Incoming CO Line Call Features—OVERVIEW
None
4.9 CO & Incoming Call [9]
Feature Guide
453