4.2 System [2]
Break
Break start and end times can be programmed for each day of the week for Time Tables that
contain breaks.
Break 1, 2, 3 Start—Setting
Enables the setting of each break mode start time.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Break 1, 2, 3 Start—Hour
Specifies the hour of each break mode start time.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Break 1, 2, 3 Start—Minute
Specifies the minute of each break mode start time.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Break 1, 2, 3 End (Day Mode)—Setting
Enables the setting of each break mode end time (back to day mode).
Default
Value Range
278
Feature Guide
Disable
Disable, Enable
2.2.4 Time Service
4.2.14 Class of Service—COS Settings [2-7-1]
4.3.3 Extension Group [3-2]
0
0–23
2.2.4 Time Service
4.2.14 Class of Service—COS Settings [2-7-1]
4.3.3 Extension Group [3-2]
0
0–59
2.2.4 Time Service
4.2.14 Class of Service—COS Settings [2-7-1]
4.3.3 Extension Group [3-2]
Disable
Disable, Enable