Installation; Operation - Bosch Praesideo 3.5 Installation And User Instructions Manual

Digital public address and emergency sound system
Table of Contents

Advertisement

2011-02 | Installation and User Instructions | 5 | Call Stations

20.4 Installation

The call station basic is suitable for table-top use. Its
functionality can be expanded by connecting:
Up to 16 call station keypads for pre-configured
actions (LBB4432/00 or LBB4434/00).
Up to 15 call station keypads for pre-configured
actions (LBB4432/00 or LBB4434/00) and one
numeric keypad (PRS-CSNKP).
table 20.2: Power/Fault LED (left)
Color
---
Green
Yellow
Yellow
table 20.3: Call status LED (center)
Color
----
Green
Green
table 20.4: System status LED (right)
Color
---
Yellow
Yellow
Red
Bosch Security Systems | 2011-02
State
Explanation
Off
Power not available.
On
Power on and no system or remote call station faults.
Blinking
Power on, but there is a fault in the system.
On
Power on, but there is a fault in the remote call station or the
Praesideo network is not operational.
State
Explanation
Off
No call status to display.
On
Ready to talk/live announcement.
Blinking
Chime on or pre-recorded message playing.
State
Explanation
Off
No pre-defined or selected zones are in use or reserved by the
system, and no emergency announcement is being made.
On
Lower priority announcements are being made or are reserved to
all or some of the zones which are pre-assigned to the
press-to-talk key of the remote call station and selected zones of
the keypad (if fitted).
Blinking
Announcements with higher or the same priority (not emergency)
are on or reserved to all or some of the zones which are
pre-assigned to the press-to-talk key of the remote call station
and selected zones of the keypad (if fitted).
On
An emergency announcement is being made. Normal
announcements can be made to the zones which are not involved.

20.5 Operation

The remote call station has three status LEDs that
provide information about the remote call station and
the status of the Praesideo system:
Power/fault LED (left), see table 20.2.
Call status LED (center), see table 20.3.
System status LED (right), see table 20.4.
en | 237

Advertisement

Table of Contents
loading

Table of Contents