Panasonic KX-TDA100 Features Manual page 309

Configuration–Slot–E1
Common
Common–Basic
Parameter
Slot
Line Coding
Frame Sequence
Frame Option
First Dial Time (DID/
TIE)
Answer Detection Time Specifies the duration time that the system
Seizure ACK Waiting
Time
Sending LIU Option
Receiving LIU Option
RAI Signal Detection
Mode
DTMF Tone
DTMF Inter-digit Pause Specifies the DTMF Inter-digit Pause Time. 64 + 16 × n (n=0–15)
Pulse Dialling
Pulse % Break
Pulse Type
Pulse Inter-digit Pause Selects the Pulse Inter-digit Pause Time.
Tone Feed Back
Maximum Break Width Specifies the maximum Break Width
Minimum Make Width
Description
Specifies the slot no.
Selects the E1 PCM line cording.
Selects the E1 frame type.
Specifies the values of C-bit and D-bit.
Specifies the Pause Time between seizing
the DID/TIE channel and sending the
dialled digits.
will accept as an answer signal.
Specifies the Seizure ACK waiting time for
DR2 (Digital System R2) signals. ACK is an
ASCII or EBCDIC code character indicating
a positive acknowledgement that a
message has been received correctly.
Selects the shape of transmitted pulse.
Selects the level of equalisation applied to
incoming calls.
Selects the mode to detect the RAI signal. Type 1/Type 2
Selects the % break for pulse digits.
Selects the pulse dialling digit pattern.
Assigns whether to turn on or off tone
feedback.
Specifies the minimum Make Width
3.2 PC Programming
Value Range
PBX No.–Slot No.
(Card type is only E1.)
HDB3/AMI
PCM30/PCM30-CRC
C=A, D=B/C=0, D=0/
C=0, D=1/C=1, D=0/
C=1, D=1
32 × n (n=1–255) ms
32 × n (n=1–255) ms
0.5 × n (n=1–20) s
Mode 1–8
Automatic/6/12/18/24
dB
ms
60/67 %
Normal/Sweden/
New Zealand
630/830/1030 ms
Yes/No
72 + 8 × n (n=0–11) ms
8 × n (n=1–5) ms
Feature Guide 309