Panasonic KX-TDA100 Features Manual page 153

Button
INTERCOM
AUTO
ANSWER/MUTE
VOICE CALL/
MUTE
AUTO DIAL/
STORE
CONF
(Conference)
FWD/DND
PAUSE
Soft
SELECT
SHIFT
MODE
[DSS Console]
Button
ANSWER
RELEASE
Flexible CO (Trunk)
Flexible DSS (Direct Station
Selection)
PF (Programmable Feature)
1.17 Proprietary Telephone (PT) Features
Used to make or receive intercom calls.
Used to receive an incoming call in hands-free mode, or
used for microphone or handset mute during a
conversation. (Dual feature button)
Used to monitor an intercom call automatically (a hands-
free conversation is not possible). Also used for handset
microphone mute during a conversation.
Used for System/Personal Speed Dialling and storing
programme changes.
Used to establish a multiple-party conversation.
Used to perform FWD or DND. (Dual feature button)
Used to insert a pause in a stored number. With an APT, it
is used as the PROGRAM button.
Used to perform the feature or operation appearing above
the button at the bottom line of the display.
Used to select the displayed feature or to call the displayed
number.
Used to access the second level of Soft button features.
Used to shift the display to access various features.
Used to answer an incoming call or place the current call on
hold and answer another call with one-touch.
Used to disconnect the line during or after a conversation or
to complete a Call Transfer.
Used to make or receive a trunk call or can be reassigned
to a different trunk or to another feature button.
Used to access an extension with one-touch. Every button
is programmed to correspond to an extension. DSS buttons
can also be reassigned to other features.
Used to access a preprogrammed feature with one-touch.
(no default)
Usage
Usage
Feature Guide 153