Panasonic KX-TDA100 Features Manual page 163

Hybrid ip pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

Call Transfer
(CT)—by ISDN
Malicious Call
Identification
(MCID)
Completion of
Calls to Busy
Subscriber
(CCBS)
3.
ISDN Centrex Service
An extension user can have access to the features of the ISDN Centrex Service of the
telephone company (e.g., Call Transfer). This is used by putting the current ISDN call on
hold by sending a flash/recall signal. This feature is enabled or disabled for each ISDN
port.
4.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. The QSIG mode, Master or
Slave, can be enabled on an ISDN port basis.
5.
ISDN Extension (
Network (ISDN)—SUMMARY)
An ISDN (BRI/PRI) port can be used for extension connection. While the extension
connection is enabled, ISDN terminal devices (e.g., ISDN telephone, G4 Facsimile,
personal computer) or a behind PBX can be connected to the port.
When the ISDN port is in P-P configuration, one ISDN terminal device can be connected
to the port. When the ISDN port is in P-MP configuration, a maximum of eight ISDN
terminal devices can be connected to the port. However, only a maximum of two devices
can be used simultaneously.
Conditions
Overlap/En bloc
ISDN call dialling mode, Overlap or En bloc, can be selected for each ISDN port. When
"Overlap" is selected, the PBX sends each dialled digit individually. When "En bloc" is
selected, the PBX sends all of dialled digits at once after the extension user completes
dialling. The PBX recognises end of dialling as follows:
– Dialling #, if programmed
– Dialling a preprogrammed telephone number
– Inter-digit timer expires.
Some supplementary services are provided by the key protocol (
by Keypad Protocol in Section 1.18.1 Integrated Services Digital Network (ISDN)—
SUMMARY).
Extension Number
An extension number can be assigned to each ISDN port.
1.18 Integrated Services Digital Network (ISDN) Service Features
Service
Transfers an ISDN call to an outside party. Call
Transfer with Announcement and Call Transfer
without Announcement are available.
An extension user can ask the telephone
company to trace a malicious caller. Information
on the malicious call will be received later on.
If an outside called party is busy, an extension
can receive callback ringing when the called
party becomes free.
ISDN Extension in Section 1.18.1 Integrated Services Digital
Description
Details in
• Call Transfer
(CT)—by
ISDN
• Malicious
Call
Identification
(MCID)
• Completion
of Calls to
Busy
Subscriber
(CCBS)
ISDN Service Access
Feature Guide
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200

Table of Contents