Communication Flexanalog Parameters - GE D90 Plus Instruction Manual

CHAPTER 6: COMMUNICATIONS

Communication FlexAnalog parameters

PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 152: User-configurable communication logic operands window
The left side of this screen displays all operands that are currently available to the D90
The communication logic operands are displayed by expanding the Comms menu.
User Configured Event Name
Range: up to 20 alphanumeric characters
Default: ---
Each available communications logic operand can be renamed to a user-specified
value. This feature allows for clearer identification or to match specific applications. The
new operand name appears in protection and automation logic, in settings that take
operands as their value, and in event reports.
The following communication FlexAnalog parameters (analog operands) are available for
Plus
the D90 . They are listed alphabetically by operand syntax.
Real-time clock analog operands
Day of Month ...............................................Real-time clock day of month value
Day of Week.................................................Real-time clock day of week value
Day of Year....................................................Real-time clock day of year value
Hour of Day ..................................................Real-time clock hour of day value
Minute of Hour............................................Real-time clock minutes of hour value
Month of Year ..............................................Real-time clock month of year value
Second of Minute.......................................Real-time clock second of minute value
Year ..................................................................Real-time clock year value
GOOSE analog inputs analog operands
GOOSE Analog In 1....................................Metered value for GOOSE analog input 1
GOOSE Analog In 2....................................The value above is available for GOOSE analog input 2 to 128
COMMUNICATION FLEXANALOG PARAMETERS
Plus
.
169