Intended Use; Product Features; Technical Data - Bosch PMD 7 Original Instructions Manual

OBJ_BUCH-1913-002.book Page 16 Monday, September 23, 2013 12:33 PM
16 | English
Product Description and Specifications

Intended Use

The measuring tool is intended for the detection of ferrous metals (e.g.
reinforced steel), non-ferrous metals (e.g. copper pipes) as well as "live"
wires/conductors in walls, ceilings and floors.

Product Features

The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Marking aid
2 Signal LED
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Sensor area

Technical Data

Digital Detector
Article number
Maximum scanning depth*:
– Ferrous metals
– Non-ferrous metals (copper pipe)
– Copper conductors (live)**
Calibration
Automatic switch-off after approx.
Operating temperature
Storage temperature
Relative air humidity, max.
Batteries
Operating lifetime (alkali-manganese batteries) approx.
Weight according to EPTA-Procedure 01/2003
* depending on material and size of the objects as well as material and condition of the
base material (walls, ceilings, floors)
** less scanning depth for wires/conductors that are not "live"
 In terms of accuracy and scanning depth, the measurement result can be infe-
rior in case of unfavourable surface quality of the base material.
2 609 140 996 | (23.9.13)
PMD 7
3 603 F81 100
70 mm
60 mm
50 mm
automatic
10 min
0 °C...+40 °C
–20 °C...+70 °C
80 %
3 x 1.5 V AAA
5 h
0.1 kg
Bosch Power Tools