Table of Contents
Advertisement
3) Run Grid-EYE application (Windows Start>>Grid-EYE>>Open Grid-EYE application)
If compatibility issues are encountered then reinstall the LabVIEW Run-Time Engine
2014 from
www.ni.com
versions.
4) Now select the appropriate COM port (shown as COM41 in the image below), and click
'Open COM' button to view the data fed to the PC from the Grid-EYE sensor.
Temperature data detected:
Temperature values can be observed on the LabVIEW (8 x 8) matrix window. Colours for
the heat map can be set between -20°C and +100°C. The second tab is showing an
interpolation of the raw signal.
User Manual
or from the supplied folder with appropriate 32bit or 64bit
Grid-EYE Evaluation Kit
37
Advertisement
Table of Contents
