Changing Supervisor Ids And User Information Recording Id - Panasonic DBS 576 Technical Manual

Section 521
Changing Supervisor IDs and User Information
Recording ID
Outline
This procedure changes supervisor IDs and user information recording ID.
Setting
Program Address 3101 - 3106:
Program Address 3201:
Operation
CUSTOMIZE MENU
→
LINE REGIST.
→
SYSTEM ID
→
AGENT ID
→
GROUP SETTING
→
CALL HANDLING
3101:****
SUPERVISOR
ID NO (1)
CUSTOMIZE MENU →
Notice
26
Change the ID of the Supervisor 1 to 6. The ID must be 4 digits. The
initial value should be assigned by your dealer.
Change the ID for user information recording. The ID must be 4 digits.
The initial value should be assigned by your dealer.
1. From [CUSTOMIZE MENU] screen, press the soft key 2 or 7 to
select [SYSTEM ID].
2. The 3101 setting screen appears. Enter the 4-digit ID number and
press HOLD key to make setting. Each time the HOLD key is
pressed, the setting changes:
3101→3102→3103→3104→3105→3106→3201.
3. Press the soft key 5 or 10 to return to [CUSTOMIZE MENU]
screen.
1. Make certain the supervisor IDs and user information recording
ID are set at installation. Otherwise, you cannot enter
[SUPERVISOR MENU]. Ask your dealer if they are not
assigned.
DBS 576 (USA) issued March 1999
Built-In ACD Supervisor Guide
576-25-521 (ACD 3.0)