Panasonic KX-TDA50 Pc Programming Manual page 177

Programming Manual References
None
Feature Manual References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when the channel type is TIE.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
This setting is only available when Channel Type on this screen is set to DID.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
2.8 [1] Configuration
PC Programming Manual 177