2.8 [1] Configuration
Reverse Detection (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the type of CO line call for which the reverse signal from the telephone company is detected.
Default
Disable
Value Range
Disable: For no CO line call
Outgoing: For outgoing CO line calls only
Both Call: For both outgoing and incoming CO line calls
Maintenance Console Location
2.8.11 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [1-1] Slot—Port Property - LCO Port
Programming Manual References
2.8.10 [1-1] Slot—Card Property - LCO type
Feature Manual References
1.3.1 Caller ID
Paytone Detection (KX-TDA100/KX-TDA200/KX-TDA600 only)
Enables the PBX to receive a pay tone signal from the telephone company.
Default
Disable
118
PC Programming Manual