Seat; Sidestand - Yamaha TT-R90 2006 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
Remove the nuts, and then pull the seat
off.
3
1. Nut
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
EAU41600
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the nuts.
NOTE:
Make sure that the seat is properly se-
cured before riding.

Sidestand

The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
vehicle upright.
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
3-7
WARNING
EAU37490
EWA14190