INSTRUMENT AND CONTROL FUNCTIONS
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
pairable damage to the catalytic
converter.
4
ECA10701
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
1. Seat lock
2. Unlock.
2. While holding the key in that posi-
tion, lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
4-14
EAU34042
1. Projection
2. Seat holder
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.