Yamaha V MAX VMX17YC Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
1
2. Push "RESET".
3. Push "SELECT" to highlight "Stop-
2
watch".
3
4
4. Push "RESET".
The multi-function display chang-
5
es to the Normal mode and the
stopwatch is displayed in place of
6
the clock.
7
8
5. Push "SELECT" to start the stop-
watch.
9
6. Push "SELECT" or the start switch
" " to stop the stopwatch.
7. Push "RESET" to reset the stop-
watch.
TIP
●
If neither "SELECT" or "RESET"
are pushed for one minute, the
screen automatically changes to
the Normal mode.
●
Pushing "RESET" for at least two
seconds changes the screen to
the Normal mode.
●
To perform further multi-function
display settings, enter the Select
mode again by pushing and hold-
ing "SELECT" and "RESET" for at
least three seconds.
Using the countdown clock:
The countdown clock can be activated
as follows.
1. Push "SELECT" to highlight "Stop-
watch".
2. Push "RESET".
3. Push "SELECT" to
"Countdown".
4. Push "RESET". The multi-function
4-10
display changes to the Normal
mode, the stopwatch is displayed
in place of the clock, and the trans-
mission gear indicator changes to
the countdown clock.
5. Push "SELECT" or shift into gear
and the countdown clock starts
counting down from "5". Simulta-
neously, the shift timing indicator
flashes according to the number
displayed (i.e., when "5" is dis-
played, the indicator flashes five
times, when "4" is displayed, the
indicator flashes four times, etc.).
The stopwatch starts counting
when the countdown clock finishes
counting.
6. Push "SELECT" or push the start
switch "
clock.
7. Push "RESET" to reset the count-
down clock and stopwatch.
highlight
8. Push "RESET" to reset the count-
down clock, and then repeat steps
5–6, OR push "RESET" again for
at least two seconds to enter the
Normal mode.
" to stop the countdown