Table of Contents
Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
Tripmeters
Turn the key to "ON". Push "SELECT"
to switch the display between the trip-
meters "TRIP-1" and "TRIP-2" in the fol-
1
lowing order.
TRIP-1 → TRIP-2 → TRIP-1
When the fuel amount in the fuel tank
2
decreases to 3.9 L (1.03 US gal, 0.86
Imp.gal), the fuel warning indicator
3
starts flashing, and the tripmeter auto-
matically changes to the fuel reserve
tripmeter "TRIP-F" and starts counting
4
the distance traveled from that point. In
that case, push "SELECT" to switch the
5
display between the various tripmeters
in the following order:
6
TRIP-F → TRIP-1 → TRIP-2 → TRIP-F
To reset a tripmeter, select it by push-
ing "SELECT", and then push "RESET"
7
for at least one second. If you do not re-
set the fuel reserve tripmeter manually,
8
it resets itself automatically and the dis-
play returns to the prior meter after re-
9
fueling and traveling 5 km (3 mi).
Select mode
The various functions of this multi-func-
tion display are adjusted in the Select
mode.
TIP
●
The transmission must be in neu-
tral to change settings in this
mode.
●
Shifting the transmission into gear
saves all settings made, then can-
cels the Select mode and displays
the Normal mode in all screens.
●
Depending on the screen, pushing
"RESET" saves settings or can-
cels the Select mode to display the
Normal mode.
Push and hold "SELECT" and "RESET"
for at least three seconds to enter the
Select mode.
The following items can be set/adjusted
in this mode:
●
brightness
●
shift timing indicator light
●
clock
●
stopwatch
●
countdown clock
●
system status
4-6
●
maintenance counters
TIP
To return to the Normal mode, push
"SELECT" to scroll to " ", then push
"RESET".
Adjusting the brightness
This function allows you to adjust the
brightness of the tachometer unit panel
("Meter panel"), the tachometer needle
("Needle"), and the speedometer and
multi-function displays ("Display") to
suit the outside lighting conditions.
1. Push
"SELECT"
to
"Brightness".
2. Push
"RESET",
"SELECT" to scroll through the
functions and to highlight an item.
3. Push "RESET"; the brightness lev-
highlight
then
push
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
