Helvex FC-185-19-0.5 Manuals

Manuals and User Guides for Helvex FC-185-19-0.5. We have 3 Helvex FC-185-19-0.5 manuals available for free PDF download: Quick Start Manual, Installation Manual

Helvex FC-185-19-0.5 Installation Manual (9 pages)

Flushometer of Electronic Sensor of Current for Urinal, 3/4” Spud, 0,79 GPF

Brand: Helvex | Category: Plumbing Product | Size: 7 MB

Recommended Tools and Materials Items Included in the Product
1
Technical Specifications
1
Recommended Dimensions
1
Product Components
2
General Installation
2
Disassemble the Flushometer
3
Place the Stop Valve and Adapter
3
Insert the Escutcheon with Cover Tube and Screw the Stop Valve
3
Weld the Adapter (Not Included)
3
Place the Assembly Outlet Tube
4
Check that the Washers Are Properly Installed
4
Insert the Wire as Shown, Screw the Nipple and Insert the Escutcheon
4
Insert the Gray Cable through the Slot in the Wall, Insert and Screw the Electronic Device
4
Place the Piston, the Gasket, the Cap, the Electronic Device and Open the Stop Valve Completely
5
Close the Stop Valve, Unscrew the Cap, Remove the Electronic Device
5
Check that There Is no Waste in the Hole, on the Filter and in the Cap
5
Loosen the Screws and Remove the Cap from the Power Supply
5
Verify Sensor Connector Is Properly Connected
5
Select the Supply Voltage and Connect the Plug to the Power Supply (Socket Outlet)
5
Unplug the Connector and Connect the Wires, Plug Again the Connector
5
When the Power Supply Is Energized, the Red Light will Turn On, Wait until It Stops Blinking
5
Enter the Power Supply to the Circuit Box, Close and Secure the Cover with the Screws
5
Place and Screw the Cover on the Power Supply
6
Fully Open the Stop Valve, Place the Cap and Do 3 Complete Flushes to Stabilize the Operation
6
Security System
6
Optimal Preventive Piston Maintenance: Every 6 Months
6
Manual Override Button
6
Flush Operation Description
6
Anti-Theft Security System
6
Safety Button Installation
6
Activated and Deactivated System
6
Close the Stop Valve
7
Remove Innerbody and Filter, Clean with Water and Soft Brush
7
Remove the Electronic Device
7
Cleaning Electronic Device
7
Adjusting the Detection Distance
7
Disassemble the Piston, Wash with Water, Replace Wear Parts if Necessary, Reassemble
7
Reassemble and Screw the Electronic Device to the Body Assembly then Fully Open the Stop Valve
7
Detection Distance Adjustment Procedure
8
Troubleshooting
8
Cleaning Recommendations
8

Helvex FC-185-19-0.5 Quick Start Manual (10 pages)

Flushometer with Current Electronic Sensor for Urinal

Brand: Helvex | Category: Plumbing Product | Size: 4 MB

Troubleshooting
2
Instalación
4
Installation
4
Operación
8
Operation
8

Helvex FC-185-19-0.5 Installation Manual (8 pages)

Brand: Helvex | Category: Plumbing Product | Size: 7 MB

Helvex Categories

Plumbing Product Bathroom Fixtures Kitchen & Bath Fixtures Toilets Dispenser

More Helvex Manuals