Advanjet HM-2600 Dispense Valve Manuals

Advanjet HM-2600 Dispense Valve Manuals

Manuals and User Guides for Advanjet HM-2600 Dispense Valve. We have 1 Advanjet HM-2600 Dispense Valve manual available for free PDF download: Maintenance And Repair

Advanjet HM-2600 Maintenance And Repair

Advanjet HM-2600 Maintenance And Repair (28 pages)

Hotmelt Jet Diaphragm-Jet Technology

Brand: Advanjet | Category: Industrial Equipment | Size: 1 MB

Table of Contents

Table of Contents
2
Kits

4
Related Manuals

4
Warnings

5
1 Required Tools and Parts

6
- Maintenance Kits
  6
- Required Tools
  9
2 Jet Disassembly

10
- Overview
  10
- Disassembled Jet (Melter Cover Removed)
  11
- Remove Syringe and Feed Tube Enclosure
  12
  - Remove the Melter Cover
    12
  - Remove the Receiver Head
    12
  - Remove the Syringe
    12
  - Remove the Feed Tube Enclosure
    12
- Remove Mounting Plates and Top Cover
  13
  - Remove Nozzle Plate (if Present)
    13
  - Remove the Dovetail Plate
    13
  - Remove the Mounting Plate
    13
  - Disconnect Heater Block
    13
  - Remove Heater Bearing
    13
- Remove Melter, Top Cover, and Heater Block
  14
- Remove Spacer Assembly
  15
- Check for Parts Set Aside
  16
3 Install New Parts and Reassemble the Jet

17
- Overview
  17
- Install the Main Air Valve and Hammer Cylinder
  18
  - Install the Air Valve
    18
  - Install the Silencer
    18
  - Install the Air Cylinder
    18
  - Tighten the Air Cylinder Setscrew
    18
- Assemble the Spacer
  19
  - Assemble the Spacer Parts
    19
  - Check the Lever Assembly
    19
  - Attach the Spacer
    19
  - Align the Lever with the Shoulder Bolt
    19
  - Install the Shoulder Bolt
    19
- Reassemble the Heater Block
  20
  - Install New Heater Seal and Washer
    20
  - Install New Spring
    20
  - New Heater Block Bearing
    20
  - Position Heater Block
    20
  - Attach Heater Block
    20
  - Optional) Connect New Heater Block
    20
- Attach the Valve Mount
  21
  - Verify O-Rings
    21
  - Install Valve Mount Screws
    21
- Optional) Replace Melter Cable
  22
- Reassemble the Jet
  23
  - Insert the Nozzle Plate Screws
    23
  - Position the Melter Assembly
    23
  - Position the Top Cover
    23
  - Attach Top Cover
    23
  - Connect the Melter
    23
  - Install Feed Tube Spacer
    23
  - Attach Upper Feed Tube Enclosure
    23
  - Tuck the Cables
    24
  - Trim the Cables
    24
  - 3.7.10 Connect the Air Valve
    24
  - Position Mounting Plate
    24
  - Attach the Mounting Plate
    24
  - Attach the Dovetail Plate
    24
4 Set the Jet Hammer Gap

25
- Using the Gap Set Fixture
  25
- Prepare the Gap Set Fixture
  26
  - Check the Zeroing Plate
    26
  - Zero the Micrometer
    26
  - Remove the Zeroing Plate
    26
  - Attach the Jet
    26
- Measure the Gap
  27
  - Connect the Jet
    27
  - Reading the Dial
    27
- Adjust the Gap
  27
Graco Standard Warranty

28

Advertisement

Advertisement

Related Products

Advanjet Categories

Industrial Equipment Dispenser Temperature Controller Control Unit Controller

More Advanjet Manuals