Table of Contents
Advertisement
Call handling
To make a call, use your mobile device
in the normal way when the headset is
connected to the device.
If your device supports last number
redialing with the headset, press the
answer/end key twice while no call is
in progress.
If your device supports voice dialing
with the headset, press and hold the
answer/end key when no call in
progress, and proceed as described in
the user guide of your device.
To answer or end a call, press the
answer/end key. To reject an incoming
call, press the answer/end key twice.
To adjust the headset volume, press
the volume key up or down.
Battery information
Your device is powered by a rechargeable
battery. The battery can be charged and
To mute or unmute the microphone,
press the middle of the volume key.
To switch the call between the
headset and a compatible device,
press and hold the answer/end key.
Clear settings or reset
To clear all the pairing settings from
the headset, switch off the headset,
and press and hold the power key and
the answer/end key until the red and
green indicator lights start to
alternate.
To reset the headset if it stops
functioning, although it is charged,
plug the headset into a charger, and
press the power key and the answer/
end key at the same time.
discharged hundreds of times, but it will
eventually wear out. Recharge your
ENGLISH
Advertisement
Table of Contents
