Related Manuals for Naxa NPB-242
Summary of Contents for Naxa NPB-242
- Page 1 INSTRUCTION MANUAL PORTABLE CD/MP3 PLAYER WITH STEREO RADIO CASSETTE RECORDER NPB-242...
-
Page 2: Important Notes
IMPORTANT NOTES INTRODUCTION Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. -
Page 3: Location Of Controls
LOCATION OF CONTROLS... -
Page 4: Names Of Controls
NAMES OF CONTROLS CASSETTE COMPARTMENT 15. FOLD-/-10 BUTTON CD PLAY/PAUSE/USB BUTTON 16. CASSETTE RECORD KEY POWER INDICATOR 17. CASSETTE PLAY KEY CD SKIP/SEARCH 18. CASSETTE REWIND KEY BACK(BACKWARD) BUTTON 19. CASSETTE FAST FORWARD KEY SPEAKERS 20. CASSETTE STOP/EJECT KEY CD PROG./P-MODE BUTTON 21. -
Page 5: Using The Radio
USING THE RADIO TUNING IN RADIO STATIONS 1. Move the FUNCTION switch to RADIO position. 2. Slide the BAND switch to select the desired wave band: AM, FM, FM ST.. 3. Tune to desired station by rotating the TUNING KNOB. 4. - Page 6 RECORDING FROM CD/MP3 1. Insert a blank cassette tape into the tape compartment. 2. Slide the FUNCTION switch to CD/MP3/USB/AUX position. 3. Load a CD and select the desired track you want to record. 4. Press CD PLAY/PAUSE button to start playback. Press RECORD key to begin recording. RECORD key and PLAY key go down simultaneously.
-
Page 7: Using The Cd/Mp3
CARE OF CASSETTE MECHANISM Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the unit. A range of cassette care products are available. The erase head and record/play head and the surface of the pinch roller are delicate and must not be touched with metal objects such as screwdrivers. -
Page 8: Random Play
To search for a particular passage during playback (track scanning at high speed) Press and hold the CD SKIP/SEARCH NEXT/BACK button to scan the current playing track at high speed until desired point passage, and then release the button. Playback will start again from this point. PROGRAM TRACKS Programming tracks of disc are possible when playback is stopped. -
Page 9: Aux In Operation
LISTENING TO USB FLASH DISK DEVICE 1. Set the FUNCTION switch to CD/MP3/USB/AUX position. 2. Connect the USB Flash Disk Device into the USB PORT. 3. If the audio CD in the tray, please press and hold the PLAY/PAUSE/USB button to select the USB function. -
Page 10: Specifications
SPECIFICATIONS GENERAL Power Requirement AC 127V ~ 60Hz DC 9V U M-1 x 6 PC S Power consumption AC 15 Watts Weight Approx. 2.2 kg Dimensions Approx. 300mm (W) x 235mm (D) x 155mm (H) Operation temperature C – +35 RECEIVER SECTION Receiving Bands AM/FM...