NAPCO ISV-REPT01 iSeeVideo Installation Manual

R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440 or visit us at
http://tech.napcosecurity.com/
(Note: Technical Service is for security professionals only)
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2013
The ISV-REPT01 Wireless Repeater module extends the transmission distance between the ISV WAP Wireless Ac-
cess Point and wireless iSeeVideo cameras by regenerating digital data signals in your wireless network.

Installation

Install the ISV-REPT01 on a wall outlet located half way between the ISV WAP and the iSeeVideo wireless camera. The
ISV-REPT01 will search for and automatically connect to the ISV WAP if within range. Power cycle the iSeeVideo camera
to start the connection process. The REPEATER TO CAMERA LED will turn on after the camera is successfully con-
nected to the ISV-REPT01. Note: If adding the ISV-REPT01 to an existing installation, the camera must be using the
Napco default SSID. If the camera is locked down with a custom SSID, you must factory reset the camera (insert a paper
clip into camera Reset socket, and hold for 12 seconds). Optionally, after the camera is back on line, you can generate a
new custom SSID (lock) if desired.

Controls and Indicators: Front Panel

NAPCO iSeeVideo
ISV-REPT01
Installation Guide
On Steady
(Green)
POWER LED
Blinking
WPS LED
On (Green)
REPEATER
TO
On (Amber)
WAP
On (Red)
LED
On (Green)
REPEATER
TO
On (Amber)
CAMERA
On (Red)
LED
On (Green)
LAN PORT
LED
Blinking
(Green)
Power on.
Start up process (15-20 seconds)
Off No power.
WPS feature is not in use.
Off
(LED normally off)
Connected to WAP with Best signal
Good / Normal signal strength.
Poor signal strength; relocate the unit*.
Off ISV WAP connection not established.
Connected to camera(s) with Best signal
Good / Normal signal strength.
Poor signal strength; relocate the unit*.
Off Camera connection not established.
LAN Port connected.
Off LAN Port not connected.
Data being transmitted or received via
the LAN Port connection.
WI2081 12/13
strength.
strength.
1