Charging Battery - Sharp WX03SH User Manual

Charging Battery

AC Charger is not included in the
package; purchase WILLCOM AC
Charger 01 (AC01-MU-K) separately.
. AC Charger is not water or dust
proof. Do not charge Battery while
handset is wet.
. Battery can also be charged by
connecting handset to a PC.
Notification Lamp AC 100 V Outlet
Port Cover
External
Device Port
Micro USB Plug
AC Charger Cautions
. Handset/AC Charger may become
warm while charging.
. Retract blades after charging. Do not
pull, bend or twist cable.
. Do not use commercial chargers that
allow headphone use while charging;
may cause malfunction.
1-5
1
Open Port Cover as
shown
2
Insert Micro USB plug of
AC Charger into External
Device Port
Blades
AC
Charger
Micro USB Plug
. Insert Micro USB plug in correct
orientation; otherwise, External
Device Port may be damaged.
Confirm contours and orientation
of Micro USB plug before
inserting it.
3
Extend blades and plug
AC Charger into AC outlet
1 2
. Notification Lamp illuminates red
while charging, and goes out
when charge is full.
4
Unplug AC Charger and
retract blades
5
Remove Micro USB plug
from handset
6
Close Port Cover firmly
. Otherwise, debris may get
caught between gasket and
base, allowing ingress of liquid/
dust.