Battery Backup; Setting Clock/Alarms; Snooze/Dimmer Function; Listening To Am/Fm Radio - Onn ONB14AV201 Product Manual

QUICK REFERENCE
1 CLK/MEM Button
 In CLOCK mode, use this button to set the clock
 In RADIO mode, use this button to store radio stations in the memory
2 
/HR Button
In CLOCK mode, use this button to adjust the hour in CLOCK or ALARM time

In RADIO mode, use this button to search the radio station in backward direction

3  /MIN Button
In CLOCK mode, use this button to adjust the minute in CLOCK or ALARM time

In RADIO mode, use this button to search the radio station in forward direction

4 DIMMER Button
 Use this button to change the brightness of the display
5 ALM2/VOL− Button
 In CLOCK mode, use this button to set the alarm time in ALARM2
In RADIO mode, use this button to decrease the volume

6 ALM1/VOL+ Button
In CLOCK mode, use this button to set the alarm time in ALARM1

In RADIO mode, use this button to increase the volume

7 ALARM OFF/SOURCE Button
 Use this button to turn the ALARM off after Alarm activates
 Use this button to select RADIO or AUX mode
8 SNOOZE/SLEEP Button
Use this button to temporarily suspend the ALARM for a short period

In RADIO mode, use this button to set the SLEEP time

9 LED Display
Display for the CLOCK and RADIO frequency

10 ALARM2 BUZZER Indicator
 This indicator shows that the unit is set in ALARM2 buzzer mode
11 ALARM2 RADIO Indicator

This indicator shows that the unit is set in ALARM2 radio mode
12 ALARM1 BUZZER Indicator
This indicator shows that the unit is set in ALARM1 buzzer mode

13 ALARM1 RADIO Indicator
This indicator shows that the unit is set in ALARM1 radio mode

14 BATTERY Compartment
Compartment for the back-up battery

15 AC Power Cord
 Connects the unit to the wall outlet
16 FM Wire Antenna
 Extend this wire antenna to obtain better FM broadcasting
17 AUX-IN Jack
Connects the unit to an external audio device

18 PM Indicator
This indicator shows that the time display is PM

19 SPEAKER
 Sound output
-4-
CONNECTING THE UNIT TO POWER
Plug AC power cord to the AC wall outlet. Before switching on the unit, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.

BATTERY BACKUP

Insert 2 AAA batteries into the battery compartment. Be sure to observe the proper polarity (the "+" and
"-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time, alarm time settings, and stored radio
stations are preserved in the memory of the unit using the battery back-up function.
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the CLK/MEM button for about 1 second, the time will
begin to flash on the LED display.
2. Press the  /HR button to adjust the hour.
3. Press the  /MIN button to adjust the minute.
4. When the correct time is selected, press the CLK/MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press and hold the ALM1/VOL+ or ALM2/VOL− button. The ALARM
time will begin to flash on the LED display.
2. Press the  /HR button to adjust the alarm hour.
3. Press the  /MIN button to adjust the alarm minute.
4. When the correct time is selected, press the ALM1/VOL+ or ALM2/VOL− button to confirm.
5. Press the ALM1/VOL+ or ALM2/VOL− button to select the ALARM sound mode - buzzer or currently
set radio station. The alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
minutes by pressing the SNOOZE/SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
DIMMER FUNCTION
Press the DIMMER button to change the brightness of the display.
TURN OFF THE ALARM
When the ALARM activates, press the ALM OFF/SOURCE button to turn off the ALARM.
LISTENING TO THE AM/FM RADIO
1. Press the ALM OFF/SOURCE button to select the FM or AM mode.
2. Press the  /MIN button or  /HR button step by step to tune to the desired radio stations.
3. Press and hold the  /MIN button or 
next radio station in the direction of the search. The search operation simply finds stations with
strong signals. Stations with weak reception can only be tuned in manually.
/HR buttons for approx. 1 second, it will start to search the
-5-