Table of Contents
Advertisement
2.4
Connecting the cables
Connect the cables as the following instructions:
•. To.connect.the.audio.cable: connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
•. To.connect.the.power.cord: connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•. To.connect.the.VGA/DVI.cable:
a.
Plug the VGA/DVI connector to the LED monitor's VGA/DVI port.
b.
Connect the other end of the VGA/DVI cable to your computer's VGA/
DVI.
c.
Tighten the two screws to secure the VGA/DVI connector.
When these cables are connected, you can choose the desired signal from the
Input Select item of the OSD functions.
2.5
Turning on the monitor
Gently press the power button
button. The power indicator
2-4
Audio-in
. See page 1-3 for the location of the power
lights up in blue to show that the monitor is ON.
Chapter 2: Setup
Advertisement
Table of Contents
