Panasonic Lumix DMC-FZ1000 Basic Operating Instructions Manual page 81

When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and
password are not recognised, so I cannot connect to the PC.
•
Some OS versions, including Windows 8, use two types of accounts: a local account and a
Microsoft account.
> Be sure to use the user name and password for the local account.
If you haven't set up a local account, please create one.
Transmission of the image fails midway. Some images cannot be transmitted.
•
Image cannot be transmitted when the battery indicator is flashing red.
•
Is the size of the image too large?
> Reduce the image size at [Size], and then send.
> Transmit after dividing the motion picture with [Video Divide].
•
File format of the motion picture that can be sent differs depending on the destination.
•
Capacity or number of images in the web service is full.
> Login to "LUMIX CLUB", and check the status of the destination on the web service link settings.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable,
and then play back the motion pictures on the camera. (P63)
VIERA Link does not work.
•
Is it connected properly with the HDMI micro cable? (P63)
•
Is the [VIERA Link] on this unit set to [ON]?
> If the input channel does not switch automatically, use the remote control for the TV to switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
> Check [Video Out] setting.
There is a sound from lens unit.
•
It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
•
The sound, which is caused by the automatic adjustment of the aperture, is heard when the brightness
has changed due to, for example, zooming or the movement of the camera. This is not a malfunction.
The camera becomes warm.
•
The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P16)
Zooming stops instantaneously.
•
When using the Extra Optical Zoom, the zooming action will stop temporarily. This is not a malfunction.
Others
81
(ENG) SQT0628