ASROCK Fatal1ty Z170 Gaming K4 Series User Manual page 30

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.7, No. 17)
Serial ATA3 Connectors
(SATA3_0_1:
see p.7, No. 8)
(SATA3_2_4:
see p.7, No. 11)
(SATA3_3_5:
see p.7, No. 10)
Serial ATA Express
Connectors
(SATA3_4_5 /
SATA3_2_3:
see p.7, No. 14)
USB 2.0 Headers
(9-pin USB1_2
(see p.7, No. 18)
(9-pin USB3_4)
(see p.7, No. 19)
22
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
SATA3_5 SATA3_4
SATA3_3 SATA3_2
SATA3_4_5 SATA3_5 SATA3_4
SATA3_2_3 SATA3_3 SATA3_2
USB_PWR
-B
+B
GND
DUMMY
1
GND
+A
-A
USB_PWR
Please connect the
chassis power LED and
the chassis speaker to this
header.
hese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
If M2_1 is occupied by a
SATA-type M.2 device,
SATA3_0 will be disabled.
Please connect either
SATA or PCIe storage
devices to these
connectors.
If M2_1 is occupied
by a SATA-type M.2
device, the SATA func-
tion of SATA3_2_3 and
SATA3_4_5 will be
disabled.
here are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.