Cocoon AMP TV Getting Started Manual

AMP TV
Getting Started Guide
1.

UNPACK

Unpack the Cocoon AMP TV from the packaging and check you have all the components:
• 1 X Cocoon AMP TV
• 1 X Power Adaptor
• 1 X HDMI Cable
• 1 X Remote Control
2.

CONNECT TO YOUR TV

Using the supplied HDMI cable, connect the Cocoon Android
Media Player to your TV. Connect the HDMI cable to the port
marked 'HDMI' on the rear of the AMP TV and then to an HDMI
input on your TV. Ensure your TV is set to display the correct
HDMI input, for example HDMI1.
3.

CONNECT TO POWER

Connect the power adaptor to a power outlet then connect the
cord to the rear of the AMP TV in the port marked 'DC 5V'. Turn
on the power at the wall. Once connected, the AMP TV will
automatically begin booting up (ensure your TV is turned on).
4.

REMOTE CONTROL

Insert the included Activ Energy batteries into the remote control by removing the battery cover on the rear of the
remote. Insert the batteries, taking note of the polarity markings.
5.

CONNECT A USB DRIVE OR MICRO SD CARD

Connect a USB memory stick with your movie file that you wish to play to either of the ports marked 'USB'. You can
also insert a MicroSD card into the slot marked 'Micro SD'.
After Sales Support 1300 663 907
www.winplus.com.au
HE115020 - Media Player GSG.indd 1
• 2 X Activ Energy AAA Batteries
• 1 X Manual
• 1 X Getting Started Guide
• 1 X Warranty Card
2 3
5/01/2015 4:57 pm