Makita N1900B Instruction Manual page 9

Rabbeting
To make a stepped cut as shown a t the right, use the edge
fence.
Draw
a
cutting line on the workpiece. In-
sert the edge fence into the hole in the
front of the tool. Align the blade edge with
the cutting line.
Adjust the edge fence until it comes in con-
tact with the side of the workpiece, then
secure it by tightening the screw.
You may wish
to
add to the length of the
fence by attaching an extra piece of wood.
Convenient holes are provided in the fence
for this purpose, and also for attaching an
extension guide (optional accessory).
I
I
NOTE
:
When planing, move the tool with the edge fence flush with the side of the workpiece.
Otherwise uneven planing may result.
Max. shiplapping depth i s 9 mm (1 1/32").
9