Advertisement
6. Once both cameras are connected, a screen like the one below will appear.
NOTE
•
Once you have connected to devices via Wi-Fi, recent destinations will be listed first
when you access the Wi-Fi menu by pressing the < >button. You can easily connect
again by pressing the < >< > buttons to choose the device name. To add a new device,
display the device selection screen by pressing the < >< > buttons, and then configure
the setting. If you prefer not to display recent target devices, press the <MENU > button,
and on the [
•
To add multiple cameras, repeat the above procedures starting from step 2.
Sending Images to a Camera Individually
7. Press the < >< > buttons to choose [Send this image], and then press the <FUNC./SET> (
) button.
] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
Advertisement
