You can choose to print your labels in many Remove the batteries if the labelmaker will not different sizes and styles. The labelmaker uses DYMO be used for a long period of time. D1 label cassettes in widths of 6 mm (1/4”), 9 mm Using the Battery Pack (3/8”), 12 mm (1/2”), or 19 mm (3/4”).
2. Set the cassette switch for the size of the label cassette that you are inserting. See Figure 4. Your labelmaker comes with one label cassette. Visit www.dymo.com for information about purchasing A notch in the cassette fits over the switch when the additional label cassettes.
Power Selecting a Language You can select from a number of different language button turns the power on and off. After two options. By default, the language is set to English. minutes of no activity, the power is switched off automatically.
Space Bar Figure 8 Refer to the LabelPoint 350 Quick Start Card for key inserts one or more blank spaces installation instructions and the DYMO Label Software in your text.
Changing the Font Size Adding Font Styles Seven font sizes are available for your labels: You can choose from thirteen different font styles to apply to your text. See Figure 9. Arial Narrow Normal Arial Normal Vertical Arial Wide Italic Times New Roman Bold When you select a font, that font applies to all...
The number of lines you can print on a label depends underline, or background style. on the size label you are using: • Maximum of five lines on 19 mm (3/4") labels DYMO Normal • Maximum of three lines on 9 mm (3/8") and 12 mm DYMO Underline (1/2") labels...
Adding Symbols To add a symbol 1. Press . The first row of symbols shown in the Symbols The labelmaker supports the extended symbol set as table appears in the display. shown in Figure 11. 2. Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols.
Printing Multiple Copies You can specify a fixed length for a label in 2 mm (0.1”) increments between 40 mm (1.5”) and 400 mm You can print up to 16 copies of a label at one time. (15.0”). The preset fixed length is 100 mm (4.0”). Any When printing multiple copies, a dotted cut-line is change you make to the fixed-length setting remains printed between each label.
One or more question marks appear between the To align the text barcode symbols ( ). > 1. Press 2. Select the desired alignment using the arrows keys ???????0 and press You may see a 0 in the far right position for some 3.
4. Select a memory location and press Caring for Your Labelmaker Your label text is saved and you are returned to the Your labelmaker is designed to give you long and label. trouble-free service, while requiring very little Storing Formats maintenance.
• Adjust the fixed-length label setting appropriately, or • Select a narrower font size. If you still need assistance, contact DYMO Customer Support. Refer to at the back of Contacting Customer Support this User Guide to locate the contact number for your country.
We also welcome your suggestions about additional topics you would like to see covered in the documentation. Send email messages to: documentation@dymo.com Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Support.
Need help?
Do you have a question about the LabelPoint 350 and is the answer not in the manual?
Questions and answers