Download Print this page

Specifications; Legal Notices - Dynex DX-PWLC541 User Manual

Netbook and chromebook charger

Advertisement

DX-PWLC541 14-1284_MAN_V2_ENG.fm Page 6 Thursday, December 4, 2014 3:02 PM
6
Will using an incorrect tip damage my netbook or Chromebook?
The tips are designed to be used with specific netbooks or Chromebooks and so you should only use
the tip that is designated specifically for your netbook or Chromebook. The correct tip can be identified
by using the online Tip Wizard at http://bbyurl.us/tipfinder.
The use of an incorrect tip may cause performance issues, including the inability to charge the internal
battery or power the netbook or Chromebook, or the display of an error message on the netbook or
Chromebook screen. It is also possible that the use of an incorrect tip could damage your netbook or
Chromebook. For these reasons, it is necessary to use the tip designed specifically for your device.
My netbook or Chromebook is more than 40 watts (for example 75 watts, 90
watts). Will this charger damage my netbook or Chromebook?
This is a 40 watt charger and it should NOT be used with netbooks or Chromebooks that require more
than 40 watts of power.
I notice that the charger is warm when I use it. Is this a problem?
During standard operation the charger body may feel warm, and this is normal. The charger should
always be placed in a ventilated area in order to prevent over-heating.
If I leave the charger plugged in when I'm not using it does it waste energy?
This Dynex charger meets EnergyStar and CEC IV energy requirements which means it is an
energy-efficient product designed to conserve power. When the charger is plugged in and not being
used it draws less than 0.5 watts of power.

Specifications

Input voltage
Output power (DC)
Output voltage
AC power cord length
Output cable length
Dimensions (LxWxH)
Weight

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
100 to 240 volts AC
40 watts continuous power
12 V/19 V (auto switching)
72" (182 cm)
49" (124 cm)
3.7 x 1.5 x 1.1 inches
(9.4 x 3.8 x 2.8 cm)
0.33 lbs. (0.15 kg)
DX-PWLC541

Advertisement

loading