Martin Audio CS265 User Manual page 2

<
CONTENTS
Standards Applied
1
Thank you for purchasing a Martin Audio CS265, a sub-bass system
designed to be used with the C115 and C516 Contractor Series
loudspeakers. It incorporates two powerful 6.5" (165mm) drive units in an
ultra-compact enclosure.
2
Each Martin Audio loudspeaker is built to the highest standard and
thoroughly inspected before it leaves the factory. After unpacking the
system, examine it carefully for any signs of transit damage and inform
your dealer if any such damage is found. It is suggested that you retain
the original packaging so that the system can be repacked at a future date
if necessary.
Please note that Martin Audio and its distributors cannot accept any
responsibility for damage to any returned product through the use of
non-approved packaging.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
PRINT
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
EMC Emission
Immunity
Electrical Safety
INTRODUCTION
UNPACKING
Martin Audio – CS265
EN55103-1:1996
EN55103-2:1996
EN60065:1993
2
GUIDES