Toshiba SD-P5000-S-TN Service Manual page 19

NOTE: "24b" (SD-P5000 TV PCB ASSY) is connected and soldered to "24a" (MAIN PCB ASSY)
with a wire. The following pictures show how to connect them.
Also the two boards are soldered directly in some points as shown below. For detailed soldering
points, refer to the main board and PCB ASSY which should be replaced.
.... Soldering points
Wire
SD-P5000 TV PCB ASSY
MAIN PCB ASSY
Wire
(Back view of main board) (Top view of main board)