Advertisement
1.DISASSEMBLING
DOOR
(1)
Insert a thi;flat
blade screwdriver
between
the choke dielectric and the door main frame
and lift up the choke dielectric to Irelease hooks
one by one.
(2) Remove
the choke dielectric .
(3) Remove the plastic barrier which is held on the
door cover with the adhesive
tape from the door
(4) Remove7
screws securing the door cover,
Hooks
Hooks
Door
Main
I
Choke
Dlelectrlc
Figure
16
NOTES
–
The choke
dielectric
may be damaged when
it IS
removed.
When
reinstalling
it replace
it with
new
ones if they are damaged.
–After
installing
the door in place, check for micro-
wave
energy
leakage
with a leakage
detector.
Microwave
energy
leakage
must
be below
the limit
of 5 mW/cm2.
–13–
Advertisement
