cymatic audio uTrack-X32 Quick Start Manual

32-channel recorder/player and interface card for x32

Quick Start Guide

uTrack-X32 Option Card

32-channel recorder/player and interface card for X32

Package Contents



uTrack-X32 Option Card



Printed Quick Start Guide

Congratulations on your purchase of the Cymatic Audio uTrack-X32! This option card allows

you to seamlessly add 32-channel recorder, player and USB interface functionality to your

X32 console.

This card is instantly ready for recording, simply connect a USB harddisk and press the card's

REC button to start your 32-channel recording.

For more detailed operations, the X32 card is remote-controllable by a dedicated iOS or

Android app, allowing you to use a smart phone or a tablet PC for controlling your product.

For more information, please refer to the card's user's manual, available at

www.cymaticaudio.com/downloads.

WARNING

Before installing the module, read the user manual of your X32 unit carefully.

Disconnect the power to the unit before trying to remove or install the

uTrack-X32 option card.

WARNING

This equipment is sensitive to electrostatic discharge. Do not touch the circuits,

and always touch the metallic panel first.

Cymatic Audio assumes no responsibility for damage or injury caused by

improper handling.

www.cymaticaudio.com

Page 1

Table of Contents

Do you have a question about the uTrack-X32 and is the answer not in the manual?

Page 1  Printed Quick Start Guide Welcome Congratulations on your purchase of the Cymatic Audio uTrack-X32! This option card allows you to seamlessly add 32-channel recorder, player and USB interface functionality to your X32 console. This card is instantly ready for recording, simply connect a USB harddisk and press the card’s REC button to start your 32-channel recording.
Page 2: Installation Procedure
Quick Start Guide Installation Procedure Unplug the power cable before installing the uTrack-X32 option card. The installation procedure is identical to the procedure for any other expansion card for your X32 console. Please read the installation manual of your X32 console and of one of its expansion cards carefully.
Page 3 Network: Connect this port to your local area network. You can then use the uRemote software (Windows / OSX / iOS) to remotely control all features of your uTrack-X32 option card. User Interface REC button: This button illuminates in red when recording is active.
Page 4 All documents are available at http://www.cymaticaudio.com/downloads For support requests please email support@cymaticaudio.com. © 2015 Cymatic Audio. All rights reserved. Product features, specifications, system requirements and availability are subject to change without notice. Limited warranty for this product does apply. For full details please refer to http://www.cymaticaudio.com/warranty.