Aztech MT402 Easy Start Manual

Aztech Air Purifier
ThE AIR PURIfIER IS AlREADY PREPARED AnD ASSEMblED foR YoU To USE!
Simply remove the plastic film and other packaging materials away from your
Air Purifier and follow the instructions provided in this Easy Start Guide.

UnPACKInG ThE fIlTERS

1. Place both hands at the rounded bottom
corners of the rear cover and pull it
upwards to open the rear cover.
2. Remove the plastic covers of the filters
and place it back again.

REMInDERS foR fIRST USE

1. Select a location which allows the air to
reach the entire room.
2. Ensure to place the Air Purifier on a
smooth flat level surface of your house
where clean air is needed the most.
3. Position your Air Purifier At lEASt 25cm
away from walls or any other electrical
appliance.

oPERATIon AnD USE

To Start Using your Air Purifier
1. Plug the Air Purifier to a power outlet.
2. Press the ON/OFF Button
Purifier or on the Remote control to turn
it ON.
To Adjust the Speed Manually
1. On the remote control, press the Speed
Options button to shift between low,
High, turbo, or Sleep
2. You may also press the Wind Speed Setting
button on the Air Purifier, to switch
between low, High, turbo, or Sleep
To Set the Timer
On your remote control, press the timing
Options button repetitively to shift
between 1H / 4H / 8H mode.
Please retain this easY start GUiDe for fUtUre Use.
MT402
EASY START GUIDE
on the Air
SmOOtH & FlAt SURFAcE
25cm