Advertisement

Quick Links

VIT-6Series

User Manual

2014 AUG. V1.0

Advertisement

Table of Contents
loading

Summary of Contents for Vacron VIT-6 Series

  • Page 1: User Manual

    VIT-6Series User Manual 2014 AUG. V1.0...
  • Page 2 LEGAL NOTICE The provided software and hardware authorization agreement is legally binded between The User (for personal or multiple usage) and The Company in bilateral basis, this includes any related hardware components, multimedia, printed and / or online documents and electronic files. Installation, copying or any other method of using products covered in this agreement is established on the notion The User accept terms listed in this agreement.
  • Page 3  LIMITED LIABILITY  This clause indicates the maximum influence allowed under applicable law. Under any circumstances; if FUHO (DBA as VACRON) and its supplier sustained any specific, temporal, indirect or any other forms of losses (including but not limited to...
  • Page 4: Table Of Contents

    MENU 【IMPORTANT NOTICES】 ........................1 1.【SPECIFICATIONS】 ..........................2 2.【E BROSWER LOG IN】 ........................3 2.1 Log in verifications ....................3 2.2 IE WEBPAGE INTERFACE ..................3 3.【STATUS INFORMATION】 ....................... 4 3.1 STATUS INFORMATION IN WEBPAGE ............. 4 3.2 LIVE VIEW AND FUNCTION ................5 4.【SETTINGS】...
  • Page 5: Important Notices

    【IMPORTANT NOTICES】 WARNING  PLEASE DO NOT LEAVE OR INSTALL THE DEVICE IN DAMP PLACE, DIRECT SUNLIGHT, HOT OR TIGHTLY SEALED ENVIRONMENT As this may contribute to loss of system performance, power leakage, even damages in extreme cases.  PLEASE DO NOT TOUCH POWERLINE, ADAPTER AND WALL PLUG WHEN HANDS ARE WET As this may cause electric shock.
  • Page 6: Specifications

    1.【SPECIFICATIONS】 Subject Specifications System Platform : TI TMS320DM368 Flash : 32MB RAM : 128MB Lens Manual Focus CS mount Lens (Support Auto Focus C/CS mount Lens) H.264: 30 fps at 1280x720 , maximum 8 fps at 2592x1920 MPEG4: 30 fps at 1280x720 , Maximum 8 fps at 2592x1920 MJPEG: 30 fps at 1280x720 , Maximum 8 fps at 2592x1920 Video H.264、MPEG-4 &...
  • Page 7: E Broswer Log In

    2.【E BROSWER LOG IN】 2.1 Log in verifications After successfully connected with IPC (IP camera) via IP address, you will be prompted with log in verifications. Please type in your username and password to access the system and setting. 2.2 IE WEBPAGE INTERFACE The logged in web interface displays basic hardware and software information and / or option separated into 2 parts;...
  • Page 8: Status Information

    (such as VLC) via streaming protocol. The hyperlink at the bottom connects to VACRON homepage, all product and update information can be viewed there. The IPC must be connected to WAN in order to visit VACRON.
  • Page 9: Live View And Function

    3.2 LIVE VIEW AND FUNCTION New installers may be prompted to download OCX if the computer used has yet to install OCX. Please proceed to download OCX in order to view live streaming. On the top corner is (Full screen) (Record) (Snapshot) for quick function.
  • Page 10 When above warning appears, please bypass IE security setting by manually download (allow) Active X, or it might be blocked by Windows IE.
  • Page 11: Settings

    4.【SETTINGS】 4.1 Video Setting You can change all video streaming related elements in Video Setting page, this page is separated into two parts as shown below. The upper half is streaming setting and below is camera additional information. All function is explained as below; Video Stream Setting Additional Information Camera...
  • Page 12 Choose between Single stream (H.264, MPEG4, MegaPixel), Dual stream (H.264+JPEG、 MPEG4+JPEG 、 Dual H.264 、 Dual MPEG4 、 H.264+MPEG4), Tri-stream (Dual H.264+ JPEG、 Dual MPEG4+ JPEG). Resolution : You can further define streamed resolution combination to suit your desired application, the choice include QVGA (320x240)、CIF (352x240)、VGA (640x480)、D1(720 x486)、720P(1280 x720)、SXGA(1280 x1024) 、1080P(1920 x1080)、2MP(1600x1200)、...
  • Page 13: Camera Setting

    4.2 Camera Setting Light Elements Additional Function...
  • Page 14 Camera setting page adjust optic and lighting elements, it is divided into two parts as above picture. Each option is explained as below Light sensitivity : Brightness, contrast, saturation and sharpness ranging from 0 to 255, the default setting is 128. You can adjust the color on screen in this field. Back Light Compensation : Back light compensate adjust for automatic compensation of captured object under back lited environment, this will clarify the dark areas overshadowed...
  • Page 15 10. Auto IRIS: This function will affect electronic shutter, and is only present in models with Sony Exmor sensor. 2A Setting : Off, AES (automatic electronic shutter), and AWB (auto white balance) to choose from. This function is only available in models using Sony Exmor sensor. The default setting is 2A (AES+AWB) Noise Filter: Spatial and temporal filter, both setting is set to off by standard.
  • Page 16: Audio Setting

    4.3 Audio Setting Enable Audio : Disable or enable sound recording and microphone. The drop down list activated after audio recording is enabled. Audio Input : Encoding (default setting is G711u), Sample Rate (default is 8Khz), Alarm Level (default is 50). Audio Output: This option adjust the input gain of acoustic effect, a higher setting reinforce the acoustic gain, but may also crease noise.
  • Page 17: Time Setting

    4.4 Time and Date Time Setting Boot up Setting Time Setting : IPC time format can be set manually, sync with PC or SNTP server time setting. SNTP server time setting requires user connecting to a SNTP server or set a local computer as time server.
  • Page 18 4.5 Network Setting IP Setting MAC Setting IP Network Setting : This page let user to assign network identities (LAN) to IPC via IE browser, so user can manage the allocated ports and IP address (multiple LAN) on their network switches. MAC Address: MAC address is used for the identification of manufacturer product information (model name and manufactured time).
  • Page 19 4.6 DDNS Setting DDNS Setting: DDNS is a way of URL redirection, user can register for DDNS service and obtain a specific server address in characters (as opposed to number), the visitors from WAN can search for the server name on the web, they will then be redirected to the registered IP address.
  • Page 20 4.7 Network Protocol Setting HTTP Setting: HTTP setting adjust port number corresponding to IPC (video streaming), this allows user to use multiple IPC under the same IP address. Syncing with NVR allows user to accept command from NVR. ONVIF setting allow IPC communications under ONVIF standard.
  • Page 21: Alarm Setting

    4.8 Alarm Setting Enable Alarm: This setting allows you to enable or disable all alarm setting, you need to enable alarm prior to setting them. Alarm Duration: When alarm is enabled and area of interest marked, use can differentiate the duration of buzz alarm depending on area of interest.
  • Page 22 Motion Detection: This allow user to enable motion triggered alarm. When this box is checked, a snapshot with selectable zones will appear below the setting. You can mark areas of interest (representing in red), the IPC will then record and send back video clip to NVR or other platform if the objects in picture changes or motion activities detected.
  • Page 23: Record

    4.9 Record Schedule Record: This function is available in models with SD slot. A total of 8 schedule profiles can be set to loop record video clip to SD card on specific day and time. Each video clip is store in 15 minutes length or 600 MB size in AVI format.
  • Page 24: Maintenance

    5.【MAINTENANCE】 5.1 User Account User Account: User account is separated into 3 categories with variant degree of authority. Admin being the highest authorized user with access to all setting and operation in IE browser, the second is operator with only “user account setting” unavailable. The lowest is viewer with authority only to live view.
  • Page 25: Profile Setting

    Restore Configurations: This function allow user to restore their profile setting after firmware update. Restore custom or default configurations can help users to avoid potential IPC setting conflicts. 5.4 Firmware update Firmware Update: Users can update their IPC firmware via IE browser. Please visit VACRON homepage for firmware support and version information.
  • Page 26: Restart

    5.5 Restart Restart: This function allows IPC to restart. After you set IPC to restart, please wait for 50 seconds while IPC is rebooting. 5.6 Language Language: Our IPC has 3 languages (Traditional Chinese, Simplified Chinese and English) to choose by default. Any language can be added according to requirements.
  • Page 27 For More Product Information Please Visit VACRON at http://www.vacron.com Made in Taiwan...

Table of Contents