Table of Contents
Advertisement
Quick Links
CSI Station 1A / 2A
Soldering Station
Instruction Manual
CSI station 1A / 2A
Thank you for purchasing our
temperature controlled soldering station.
Please read the manual before using the unit.
Keep manual in accessible place for future reference.
Table of Contents
Package Content......................................................................3
Specifications ........................................................................3
Safety Precautions ...................................................................4
Assembly Instructions ...............................................................4
Operating Instructions ..............................................................5
Tip Care and Maintenance ........................................................6
Calibrating the iron temperature ..................................................6
Disassembling Hand piece .........................................................7
Replacing Heating element .........................................................8
Troubleshooting connections ......................................................8
Replacing Cord .....................................................................9
Replacing Fuse .....................................................................10
Basic Troubleshooting Guide ....................................................10
12
Advertisement
Table of Contents
Summary of Contents for CSI 1A
-
Page 1: Table Of Contents
CSI Station 1A / 2A Soldering Station Instruction Manual CSI station 1A / 2A Thank you for purchasing our temperature controlled soldering station. Please read the manual before using the unit. Keep manual in accessible place for future reference. Table of Contents Package Content…..….…………………………………………………….3... - Page 2 BASIC TROUBLESHOOTING GUIDE PROBLEM 3: SOLDERING IRON TEMPERATURE IS INTERMITTENT Description: Main power LED lights up and so does the heater LED but soldering iron temperature rises and falls uncontrollably. SOLUTION: Soldering iron plug may be loose from the receptacle unplug the soldering iron and ◆...
-
Page 3: Package Content
CHANGING THE FUSE PACKAGE CONTENT Checking/ Changing the fuse: Please check if the listed parts below are included in the package: The Fuse can be found at the back of the unit, it is incorporated into the AC power receptacle. If fuse is blown replace with same type fuse only. Main Station . -
Page 4: Safety Precautions
TROUBLESHOOTING CONNECTIONS CARE and SAFETY PRECAUTIONS Test 2: Resistance test CAUTION: Misuse may cause injury and physical damage. Follow the steps in disassembling the hand piece . Test for continuity between the following pins and colored wires at the hand piece For your own safety, be sure to comply with the following PCB, all tests should register 0 to 2 Ω. -
Page 5: Operating Instructions
The heating element can be replaced as follows: Follow the steps in “disassembling the soldering iron”. For Station 1A: Unsolder the heating element wires (Red/RED) and the sensor wires (blue / white). When the heater lamp blinks on and off then it means that the tip temperature The old heating element can now be detached from the hand piece board. -
Page 6: Tip Care And Maintenance
SOLDER TIP CARE and MAINTENANCE DISASSEMBLING THE HAND PIECE The hand piece may be disassembled for trouble shooting and Tip Temperature repair: If the tip temperature is too high, it decreases the life of the tip. So we suggest you Turn off main station and unplug from power source.
Need help?
Do you have a question about the 1A and is the answer not in the manual?
Questions and answers