EarthQuake 14267 Operator's Manual page 11

Install Discharge Bag
This product comes with a discharge bag for collection of debris as it exits the discharge chute. Install the bag as shown in
FIGURE 8 or 9.
Add Engine Oil
Refer to "Engine Oil Type and Capacity" in the Regular Maintenance section for oil type and fill procedures.
Add Fuel
Refer to "Adding Fuel" in the Operation section for fuel specifications and filling procedures.
FIGURE 8 - Discharge Bag (North American Models)
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
LIFT DISCHARGE
CHUTE AND SLIDE
BAG OVER CHUTE.
MAKE SURE BAG
NOOSE FITS OVER
TOP OF DISCHARGE
CHUTE AND NOTCH
IN CHUTE BOTTOM.
PULL
DRAWSTRING
TIGHT
14306-0012R1
FIGURE 9 - Discharge Bag (CE Models)
Operator's Manual
Chipper Shredders
SLIP BAG OVER
DISCHARGE CHUTE.
MAKE SURE BAG
NOOSE FITS OVER
TOP OF DISCHARGE
CHUTE AND NOTCH
IN CHUTE BOTTOM.
PULL
DRAWSTRING
TIGHT
14306-0013R1
11