Advertisement
C H AR G ING SE T UP GU IDE
Kinesia
TM
TABLET
TABLET POWER
CABLE (WHITE)
SENSOR CHARGE PAD
KINESIA SENSOR
WALL OUTLET PLUG
HEEL CLIP
1. Remove all components from
the box and place on a desk or
table with a wall outlet nearby.
2. Place the charging pad on
the
table
with
the
rectangular image facing up.
When the charge pad is plugged
in, a green light will appear on
the front.
3. Place the iPad on a table and
connect the white cable as
shown.
4. The charge cables have been
connected to the wall adapter.
Plug the adapter into a nearby
outlet.
white
5. Place the Kinesia sensor label
down on the charging pad.
The Kinesia sensor should be placed on the
charge pad, label facing down. When properly
placed, the light will change to blue.
6. It can take up to 4 hours before
the Kinesia sensor is fully
charged.
Advertisement
