Screen - Expert Setup; Dv4Mini List And Auto Connect; Accept Only Own Call Sign - DV Development Group DV4mini User Manual

Screen - Expert setup

DV4mini list and auto connect:

The list shows all sticks found in your local network and the sticks's
status. If you run a stick without user interface then you have to start
the program "dv_serial" on this computer.
Usually "auto connect" should be checked. The user interface will
automatically connect to the next available stick.
You can run more than one sticks in your local network (with dv_serial
started) and then select one of them by clicking in the list.

Accept only own call sign:

if this entry is active then only one D-Star transceiver with the same
call sign as the DV4mini call sign can operate via the hotspot. All
others are locked out. This is a requirement in some countries
regulations. This is only doable for D-Star mode.
- 17 -