Humalog Mix75 KwikPen Instructions For Use Manual page 4

Step 8:
Hold your Pen with Needle pointing up.
Push the Dose Knob in until it stops, and
"0" is seen in the Dose Window. Hold the
Dose Knob in and count to 5 slowly.
• A stream of insulin should be seen
from the needle.
- If you do not see a stream of
insulin, repeat steps 6 to 8, no
more than 4 times.
- If you still do not see a stream
of insulin, change the needle
and repeat steps 6 to 8.
Selecting your dose:
Step 9:
Turn the Dose Knob to select the number
of units you need to inject. The Dose
Indicator should line up with your dose.
• The dose can be corrected by
turning the Dose Knob in either
direction until the correct dose
lines up with the Dose Indicator.
• The even numbers are printed on
the dial. The odd numbers, after
the number 1, are shown as full
lines.
• The HUMALOG Mix75/25 KwikPen will not let you dial more than the number of
units left in the Pen.
• If your dose is more than the number of units left in the Pen, you may either:
(10 units shown)
(15 units shown)
4